Recently Viewed Items
Helicoil Combined drilling and tapping tool M12x1,25
No.: 200108036
Dellorto Screw for cap SHA 7,10,12
No.: 3318-36
CNC Racing Right handlebar switch on throttle control unit
No.: 4016SWD82B
Helicoil Combined drilling and tapping tool M12x1,25
No.: 200108036
Availability:
1-2 weeks
34.87 €
*
Unit: piece
Enter your email address and we will notify you when this item is available again.
Combined drilling and tapping tool 0142.0 for HELICOIL® holding threads in damaged metric coarse and fine threads. Pre-drilling (tap drilling) is not required.
HELICOIL® taps create holding threads of tolerance class 5H (6H mod). After the HELICOIL® has been installed, there is an ISO thread of tolerance class 6H.
Note:
With its guide part, it can only be used for blind-hole threads under certain conditions.
d3 M12x1,25
DHC 13,7
Diameter (d) M 12x1.25
Diameter (d2) 11
L1 92
L2 35
L3 12
Pitch (P) 1,25
Product type 0142.9
Thread type Metric standard and fine thread
HELICOIL® taps create holding threads of tolerance class 5H (6H mod). After the HELICOIL® has been installed, there is an ISO thread of tolerance class 6H.
Note:
With its guide part, it can only be used for blind-hole threads under certain conditions.
d3 M12x1,25
DHC 13,7
Diameter (d) M 12x1.25
Diameter (d2) 11
L1 92
L2 35
L3 12
Pitch (P) 1,25
Product type 0142.9
Thread type Metric standard and fine thread
Information on product safety
Manufacturer:
Stein-Dinse GmbH
Address of the manufacturer:
Stein-Dinse GmbH
Waller See 11
38179 Schwülper
Germany
Homepage: www.stein-dinse.com
E-Mail: info@stein-dinse.com
*
All prices incl. VAT and excl. Shipping.
