Ignitech Sparker TCIP4 ignition unit - Ducati models with Kokusan, Bosch or Pick-Up 48-2 ignition
No.: 4004213
Disponibilità:
4-8 Settimane
203,11 €
*
Einheit: pezzo
Inserisci il tuo indirizzo e-mail e ti avviseremo quando questo articolo sarà di nuovo disponibile.
Sparker TCIP4 is available as ignition replacement for Kokusan, Bosch or sensor pick-up (pick-up 48-2).
E.g. if the existing computers should be defective once or one looks for a flexible, simple and robust alternative, which is adjustable in many ways! Or for tuning purposes/running culture improvement or also to convert injection models to carburetors, or to operate carburetor models without flywheel and its pickup of the ignition.
So the flywheel is then completely omitted!
The TCIP4 ignition is equipped with the following inputs/outputs:
2x input for pick-up
Input for throttle sensor
Lock input
Clutch sensor input
Output for RPM
Output for fuel pump relay
Output for shift light
The ignition is delivered ready mounted with wiring harness. ´Plug and Play´ delivered.
For connection to a PC or laptop a USB adapter cable is needed (not included).
Free selectable curve for conversions 750i.e./900i.e./1000s to carburetor + ignition.
For bevel Bosch ignitions or 750/900cc Kokusan ignition systems,
Just plug in and program.
Does not fit ´plug and play´ on Pantah 500/600/650 or 750F1!
When ordering please note if: Sensor pickup (Pick-up 48-2) or Bosch or Kokusan!
Only 1 BOX is needed for both cylinders! Not 2 as original!!!
WITHOUT MAPPING THE SETTINGS MUST BE ADJUSTED AND THE IGNITION MAP WRITTEN YOURSELF!
E.g. if the existing computers should be defective once or one looks for a flexible, simple and robust alternative, which is adjustable in many ways! Or for tuning purposes/running culture improvement or also to convert injection models to carburetors, or to operate carburetor models without flywheel and its pickup of the ignition.
So the flywheel is then completely omitted!
The TCIP4 ignition is equipped with the following inputs/outputs:
2x input for pick-up
Input for throttle sensor
Lock input
Clutch sensor input
Output for RPM
Output for fuel pump relay
Output for shift light
The ignition is delivered ready mounted with wiring harness. ´Plug and Play´ delivered.
For connection to a PC or laptop a USB adapter cable is needed (not included).
Free selectable curve for conversions 750i.e./900i.e./1000s to carburetor + ignition.
For bevel Bosch ignitions or 750/900cc Kokusan ignition systems,
Just plug in and program.
Does not fit ´plug and play´ on Pantah 500/600/650 or 750F1!
When ordering please note if: Sensor pickup (Pick-up 48-2) or Bosch or Kokusan!
Only 1 BOX is needed for both cylinders! Not 2 as original!!!
WITHOUT MAPPING THE SETTINGS MUST BE ADJUSTED AND THE IGNITION MAP WRITTEN YOURSELF!
- DUC Ducati Für alle Modelle (0 ccm)
Informazioni sulla sicurezza dei prodotti
Produttore:
Stein-Dinse GmbH
Indirizzo del produttore:
Stein-Dinse GmbH
Waller See 11
38179 Schwülper
Germania
Homepage: www.stein-dinse.com
E-Mail: info@stein-dinse.com
Potrebbe anche interessarti
33,92 €
*
17,34 €
*
*
tutti prezzi incl. IVA e plus Spese di spedizione.
