visualizzato di recente
Helicoil Thread cutter M12x1,5
No.: 200108049
Arrow Zwischenrohr zentral, ohne Katalysator Ducati
No.: 822891143
Moto Guzzi Catalogo ricambi - V7 Sport
No.: 500033015
Helicoil Thread cutter M12x1,5
No.: 200108049
Disponibilità:
Disponibile a magazzino: 1
14,64 €
*
Einheit: pezzo
Short machine tap to create a holding thread (acc. to DIN 8140-2) for HELICOIL® coil thread inserts.
Properties:
• For through holes
• For blind holes (only if sufficient chip space is provided)
• Machining of materials with 700 N/mm² strength max.
• Tolerance class 6H mod. corresponds with 5H
Note:
Only suited for blind holes if sufficient chip space is provided. Minimum requirement: 1 d deeper than the full thread length.
The short machine tap can also be used as a machine tap.
d3 12
DHC min. 14
Diameter (d) M 12x1.5
Diameter (d2) 11
L1 70
L2 22
L3 12
Pitch (P) 1,5
Product type 0140.0
Thread type Metric standard and fine thread
Version C
Properties:
• For through holes
• For blind holes (only if sufficient chip space is provided)
• Machining of materials with 700 N/mm² strength max.
• Tolerance class 6H mod. corresponds with 5H
Note:
Only suited for blind holes if sufficient chip space is provided. Minimum requirement: 1 d deeper than the full thread length.
The short machine tap can also be used as a machine tap.
d3 12
DHC min. 14
Diameter (d) M 12x1.5
Diameter (d2) 11
L1 70
L2 22
L3 12
Pitch (P) 1,5
Product type 0140.0
Thread type Metric standard and fine thread
Version C
Informazioni sulla sicurezza dei prodotti
Produttore:
Stein-Dinse GmbH
Indirizzo del produttore:
Stein-Dinse GmbH
Waller See 11
38179 Schwülper
Germania
Homepage: www.stein-dinse.com
E-Mail: info@stein-dinse.com
*
tutti prezzi incl. IVA e plus Spese di spedizione.
