Recently Viewed Items
Helicoil combined drilling and tapping tool M14x2
No.: 200108038
Scorpion EXO-510 Air Frame Integral Helmet Black/Blue/White
No.: SC51274230-05
X-ring chain DID525ZVM-X2/82N Chain open with rivet lock
No.: 5262525370822
Helicoil combined drilling and tapping tool M14x2
No.: 200108038
Availability:
1-2 weeks
41.53 €
*
Unit: piece
Enter your email address and we will notify you when this item is available again.
Combined drilling and cutting tool 0142.0 for HELICOIL® holding threads in damaged metric standard and fine threads. Pre-drilling (core hole drilling) is not necessary.
HELICOIL® taps produce holding threads of tolerance class 5H (6H mod). After HELICOIL® assembly, an ISO thread of tolerance class 6H is produced.
Note:
Can only be used to a limited extent for blind hole threads due to the guide part.
d3 M12x1.25
DHC 13.7
Diameter (d) M 14
Diameter (d2) 11
Thread type Metric fine and standard thread
L1 92
L2 35
L3 12
Product type 0142
Pitch (P) 2
HELICOIL® taps produce holding threads of tolerance class 5H (6H mod). After HELICOIL® assembly, an ISO thread of tolerance class 6H is produced.
Note:
Can only be used to a limited extent for blind hole threads due to the guide part.
d3 M12x1.25
DHC 13.7
Diameter (d) M 14
Diameter (d2) 11
Thread type Metric fine and standard thread
L1 92
L2 35
L3 12
Product type 0142
Pitch (P) 2
Information on product safety
Manufacturer:
Stein-Dinse GmbH
Address of the manufacturer:
Stein-Dinse GmbH
Waller See 11
38179 Schwülper
Germany
Homepage: www.stein-dinse.com
E-Mail: info@stein-dinse.com
*
All prices incl. VAT and excl. Shipping.
