LSL GONIA Clamp kit Ø 28.6 mm, universal, silver, L = 39 mm mm

LSL GONIA X-Bar universal clamping blocks

For the use of X-bar handlebars (28.6 mm) LSL offers the necessary clamping blocks for screwing in the original mounting points of the upper triple clamps. The clamping blocks are CNC machined from high quality solid aluminum. They replace the stock clamping blocks to achieve a different height and a better look. They can be mounted in the original mounting points with centered M10 x 1.25 mm bolts. On models with rubber mounts, these remain in place.

Remark:
Please check if your vehicle is listed in the ABE with and determine the required screw length.

Attention:
This article is only registration-free if your motorcycle in the enclosed ABE is assigned to the clamp KM45/KG45 and in compliance with all conditions.
For vehicles that are not listed in the model list, an approval by acceptance according to § 19(2) StVZO is possible.

This is how you determine the screw length:
Measure the length of the original screws by which they protrude from the original clamps. If necessary, add the thickness of the selected base.
Otherwise, simply select L = (the measured dimension).

suitable increase by 15 or 25 mm: 127UN0...

ATTENTION! For motorcycles with firmly cast 22.2 mm handlebar mount, please use the adapter part no. 127RK25...

Material: Aluminum
Material treatment: CNC milled, anodized
Mounting: central screwing at the standard mounting points with M10x1,25mm screws
Clamp KG45: lower edge clamp to center handlebar 45 mm
Dimensions: 28.6 mm clamping, for handlebars with a Ø of 28.6 mm

Scope of delivery:
- Clamping blocks (KG45) 1 pair
- screws M8x25 4 pieces
- screws M10x1,25 2 pieces in the chosen length
- washers M10 2 pieces
- Nuts M10x1,25 (self-locking) 2 pieces