Recently Viewed Items
motogadget mo.stop
No.: 300283139
motogadget mo.stop
No.: 300283139
Availability:
In stock: 1
48.99 €
*
Unit: piece
Details:
mo.stop, the adjustable, digital brake light modulator to increase driving safety.
Various flashing modes turn the standard brake light into a conspicuous warning light. The following traffic recognizes much better and faster the brake operation of the motorcycle. An important plus in safety on all two-wheelers, which are known to be quickly overlooked. Especially for custom bikes and conversions with very small or low-lying brake lights.
The principle is already partly integrated in cars with upscale equipment ex works (adaptive brake light). In other countries, such as the USA, it is also widely used for motorcycles. Unfortunately in Germany not (yet) registered.
In the event of an emergency, the mo.stop does not need to be removed. Simple reprogramming via dip switch is sufficient.
The mo.stop can also be used as a flasher relay with automatic switch-off. Safety aspect!
Flasher unit automatically switches off the flasher(s) after 20 seconds if set accordingly. No more unintentional continuous flashing!
Use as brake light control:
Use as flasher relay (without/with switch-off):
Specifications and features:
mo.stop, the adjustable, digital brake light modulator to increase driving safety.
Various flashing modes turn the standard brake light into a conspicuous warning light. The following traffic recognizes much better and faster the brake operation of the motorcycle. An important plus in safety on all two-wheelers, which are known to be quickly overlooked. Especially for custom bikes and conversions with very small or low-lying brake lights.
The principle is already partly integrated in cars with upscale equipment ex works (adaptive brake light). In other countries, such as the USA, it is also widely used for motorcycles. Unfortunately in Germany not (yet) registered.
In the event of an emergency, the mo.stop does not need to be removed. Simple reprogramming via dip switch is sufficient.
The mo.stop can also be used as a flasher relay with automatic switch-off. Safety aspect!
Flasher unit automatically switches off the flasher(s) after 20 seconds if set accordingly. No more unintentional continuous flashing!
Use as brake light control:
- Ultra small and lightweight, practically just a piece of cable with a tiny candy-sized device
- Installation in the wiring harness simply in line with the brake light
- 6 different light/blinker variants for brake light adjustable
- Nearly load-independent - therefore suitable for almost all LED brake lights (from 1 W) or conventional brake light lamps
- Super simple connection only via two cables - just connect in series
- Short-circuit proof - automatic overload protection - fuse against voltage peaks from the on-board power supply system
- No heat generation during operation
- Also suitable for 6 V brake light
- Immediate, loss-free response of the brake light - waterproof and vibration-resistant
Use as flasher relay (without/with switch-off):
- Almost load-independent (from 1 W)
- Always constant flashing frequency, therefore suitable for almost all LED-flashers (from 1W), all micro-flashers, halogen-flashers, 10 Watt flashers, 21 Watt flashers etc.
- Ideal for custom bikes and conversions with limited space - no clunky standard relay
- Works e.g. with 4 flashing lights or 2 handlebar end flashers etc.
- Super simple connection only via two cables - just connect in series
- Also suitable for 6 V indicators
- Adjustable as flasher relay with automatic switch-off
Specifications and features:
- Housing L x W x H: 26 mm x 12 mm x 10 mm
- Length of connection cable: approx. 2 x 50 mm
- Weight: approx. 6 g
*
All prices incl. VAT and excl. Shipping.
