Hepco & Becker side case carrier Lock-it, silver

The Hepco & Becker Lock-it side case carrier - made from German tubular steel and custom-made laser parts, which are reinforced in areas subject to high stress.
The carriers can be fitted and removed in a matter of seconds. All you have to do is loosen the attached Lock-it screws with a quarter turn and you can remove the side parts to the rear or to the side. To prevent theft, you can optionally protect the carrier from thieves with our lockable Lock-it screws.
All cases are locked to the carrier using a retaining lock on the case. This requires the lock adapters which are normally included with the case. The lock adapters are screwed to the right and left of the carrier and then provide a fastening option for the case's retaining locks.

• Sturdy construction MADE IN GERMANY
• Quickly removable, only inconspicuous small tabs remain on the motorcycle
• High-quality surface finish
• Generally easy to fit, please refer to the assembly instructions provided
• Scope of delivery: right + left including mounting material and installation instructions
• Please refer to the vehicle-specific information or the installation instructions for any restrictions
• Suitable for most Hepco & Becker hard-shell side cases
• (Please note model-specific information!)
• Luggage systems generally do not require ABE or registration
• Tube diameter: 16 mm