Helicoil Combined drilling and tapping tool M14x1,25 M14x1,25

Combined drilling and cutting tool 0142.0 for HELICOIL® holding threads in damaged metric standard and fine threads. Pre-drilling (core hole drilling) is not necessary.

HELICOIL® taps produce holding threads of tolerance class 5H (6H mod). After HELICOIL® assembly, an ISO thread of tolerance class 6H is produced.

Note:
Can only be used to a limited extent for blind hole threads due to the guide part.

d3 M14x1.25
DHC 15.7
Diameter (d) M 14x1.25
Diameter (d2) 11
Thread type Metric fine and standard thread
L1 92
L2 35
L3 12
Product type 0142
Pitch (P) 1.25