MOTUL brake fluid Racing RBF 700 FL, 500 ml

RBF 700 FACTORY LINE module

MOTUL (Racing Brake Fluid) RBF 700 is a high performance brake fluid designed to provide very consistent and maximum braking performance at extreme braking temperatures generated by carbon and ceramic racing brake disc systems.

Suitable for all braking systems (steel, ceramic or carbon brake discs) currently found in racing.
Allows the brake vents to be minimized, thus improving air resistance.
Can be used with conventional steel brake discs.
Can also be used for clutch systems. RBF 700 meets the DOT 4 standard, allowing the fluid to be used in high performance vehicles for everyday road use.

Outperforms conventional polyglycol-based brake fluids (DOT 3, DOT 4)

SPECIAL ADVANTAGES / APPLICATION NOTES

• Avoid mixing with other polyglycol-based brake fluids DOT 3, DOT 4 and DOT 5.1.
• Extremely high dry boiling point of 336°C compared to other silicone or polyglycol-based products allows effective braking even under the most extreme operating conditions.
• Improves aerodynamics due to reduced air intake for brake cooling.
• Very high wet boiling point of 205°C compared to other silicone or polyglycol based products allows efficient braking even under extreme conditions.
• Under racing operating conditions, brakes are subjected to very high thermal loads, which is why MOTUL RBF 700 FACTORY LINE should be checked at least after every 2nd race and changed if necessary.
• Change the fluid according to the manufacturer's recommendations and your own use.
• Brake fluid absorbs moisture from the ambient air. This reduces the boiling point. For this reason, MOTUL RBF 700 FACTORY LINE should only be stored under constant climatic conditions, carefully sealed in its original container.

WARNING: Not miscible with silicone-based brake fluids (DOT 5) and special mineral-based fluids (e.g. LHM). Fluid can attack paint and plastic surfaces of the vehicle. Thoroughly rinse wet surfaces with water.
with water.
In case of skin contact, also rinse thoroughly with water.

PROPERTIES

Color (visual) brownish
Viscosity at 100°C 2.1 mm²/s
Viscosity at -40°C 1580 mm²/s
Dry boiling point 336°C
Wet boiling point 205°C

SPECIFICATIONS / STANDARDS

STANDARDS: FMVSS 116 DOT 4