Helicoil Thread insert M8x12

Original - HELICOIL® Plus Free Running thread insert - refill pack for HELICOIL® Plus kits

The HELICOIL® Plus Free Running thread insert is a wire thread insert for thread reinforcement and repair. It can be attached and screwed in like a screw. The HELICOIL® Plus Free Running thread insert forms a gauge-containing internal thread that can be used on both sides for secure, high-strength screw connections. The tang is cut off at the notch (predetermined breaking point) after installation.

The HELICOIL® Plus Free Running thread insert is particularly suitable for materials with low shear strength and can also be quickly identified after installation thanks to its green coloring.

Advantages:
- High thread load capacity
- Low and constant thread friction
- Resistant to wear, corrosion and temperature
- Seating strength
- Increases quality and value
- Cost-saving
- Easy to install


Our HELICOIL® Plus Free Running thread insert is also available in larger packaging units. The article numbers start with 4130.

Package contents: 10 x HELICOIL® Plus thread inserts M8 x 12 mm

B 8,4
d1 max. 10.1
d1 min. 9.85
D1HC max. 8.48
D1HC min. 8.27
DHC min. 9.62
Diameter (d) M 8
Thread type Metric standard thread
Content 1 pc.
Nominal length t2 12
Nominal length t2 (x d) 1.5
Surface colored green
RoHs compliant
Pitch (P) 1.25
t3 max. 11.4
W 7,4
Stainless steel material
Material version A2, 1.4301, X5 CrNi1810