MOTUL engine oil 300V 4T FL Road Racing 5W-40, 1 liter

MOTUL 300V 4T Factory Line Road Racing 5W-40

4-stroke motorcycle engine oil developed for racing use by factory teams.

Fully synthetic - ESTER Core® technology.

300V Factory Line engine oil utilizes the benefits of ESTER Core® technology for maximum performance without compromising on reliability and wear.
With the selection of special synthetic esters and the combination of an innovative additive package, MOTUL achieves the perfect synergy in terms of engine, transmission and clutch.

• Exceeds the requirements of JASO & API
• JALOS - wet clutch compatibility tested according to JASO T903 Annex A (JASO MA friction requirements)
• Oil film stability, optimum adhesion, high temperature resistance for optimum wear protection.
• Very high pressure absorption capacity guarantees maximum lubrication reliability even in extreme temperature ranges.
• For modern engine technology with wet clutch and gearbox lubrication in the same oil bath. No clutch sticking and slipping.
• Fastest oiling right from the start phase reduces critical cold start wear and guarantees a long engine service life.

Applications:

Motorcycle, ATV / UTV / SxS, PWC.

Recommendations / Notes:

• Change interval according to the specifications of the vehicle manufacturer / tuner or adapted according to operating conditions.
• Before use, always observe the service documents and recommendations of the manufacturer/tuner!
• Mixing with other synthetic or mineral lubricants is possible, but not recommended for optimum performance.

Properties:

Color Visually yellowish-green fluorescent
Viscosity 5W-40
Density at 20°C ASTM D1298 0.857
Viscosity at 40°C ASTM D445 73.9 mm²/s
Viscosity at 100°C ASTM D445 13.2 mm²/s
Viscosity index ASTM D2270 182.0
Pour point ASTM D97 -51.0 °C / -49.0 °F
TBN ASTM D2896 8.3 mg KOH/g
Flash point A ASTM D92 232.0 °C / 460.0 °F