Recently Viewed Items
Superbike Handlebar-conversion MG V11
No.: 400042040
Moto Guzzi Rubber cap axle nut - 850 T3, T4, T5, Le Mans
No.: 62616800
Superbike Handlebar-conversion MG V11
No.: 400042040
Availability:
In stock: 1
99.95 €
*
Unit: piece
Instructions:
The top yoke is designed to carry bar clamps as for classic models. To mount the bar clamps you have to bore the necessary 10mm holes into the top yoke. Therefore the kit contains a template to meet the correct points for drilling.
The template has to be fixed by 2 M6-screws on the bottom side of the yoke.
The necessary size of driller is 10.0mm. Take care that the top yoke is fixed well and the drilling is produced rectangular. Further details for the mounting of the clamps and handlebar you find under the “General advices”.
The top yoke is designed to carry bar clamps as for classic models. To mount the bar clamps you have to bore the necessary 10mm holes into the top yoke. Therefore the kit contains a template to meet the correct points for drilling.
The template has to be fixed by 2 M6-screws on the bottom side of the yoke.
The necessary size of driller is 10.0mm. Take care that the top yoke is fixed well and the drilling is produced rectangular. Further details for the mounting of the clamps and handlebar you find under the “General advices”.
- MG Moto Guzzi 1100 V11 Cafè Sport (1064 ccm, 2003 - 2005)
- MG Moto Guzzi 1100 V11 Scura (1064 ccm, 2001 - 2002)
- MG Moto Guzzi 1100 V11 Sport (1064 ccm, 1999 - 2001)
Information on product safety
Manufacturer:
Stein-Dinse GmbH
Address of the manufacturer:
Stein-Dinse GmbH
Waller See 11
38179 Schwülper
Germany
Homepage: www.stein-dinse.com
E-Mail: info@stein-dinse.com
*
All prices incl. VAT and excl. Shipping.
